Home
| Question
Index
|
Engine
Services
| Airframe
Services
| Logbook
Research
| Inspections
| Articles
| Aircraft
Tool Rental
| Experimental-Projects
|
About
Us
Aircraft tool rental
New website!
Find these tools and more at:
|
Your place to rent aircraft
tools
|
We
have some unique tools for maintenance and building of smaller general aviation
and experimental aircraft. Typical rental period is ten days (two
weekends).
|
Tool Name |
Rental Cost |
Deposit: |
|
Saf-T-Blocks kit |
$4.00 |
$15.00 |
|
Description |
Jigs
for drilling holes in nuts and bolts for safety wiring and securing
purposes. Drill holes |
|
in
heads of bolts and nuts up to 3/4". Drill in threads of bolt sizes
8-32, 10-32, 1/4-20 |
|
Tool Name |
Rental Cost |
Deposit: |
|
1/2"
tubing bender |
$7.00 |
$28.00 |
|
Description |
Tubing
bender for bending 1/2" tubing with 180 degree bend and 1 1/2"
radius used on |
|
aluminum,
brass, copper, and annealed steel |
|
Tool Name |
Rental Cost |
Deposit: |
|
1/2"
tubing bender |
$7.00 |
$28.00 |
|
Description |
Tubing
bender for bending 1/2" tubing with 180 degree bend and 1 1/2"
radius used on |
|
aluminum,
brass, copper and annealed steel |
|
Tool Name |
Rental Cost |
Deposit: |
|
1/4"
tubing bender |
$4.00 |
$15.00 |
|
Description |
Tubing
bender for bending 1/4" tubing with 180 degree bend and 9/16"
radius used on |
|
aluminum,
brass, copper and annealed steel |
|
Tool Name |
Rental Cost |
Deposit: |
|
1/8"
tubing bender |
$4.00 |
$14.00 |
|
Description |
Tubing
bender for bending 1/8" tubing with 180 degree bend and 3/8"
radius used on |
|
aluminum,
brass, copper and annealed steel |
|
Tool Name |
Rental Cost |
Deposit: |
|
3/8"
tubing bender |
$6.00 |
$24.00 |
|
Description |
Tubing
bender for bending 3/8" tubing with 180 degree bend and 15/16"
radius used on |
|
aluminum,
brass, copper, and annealed steel |
|
Tool Name |
Rental Cost |
Deposit: |
|
5/8"
tubing bender |
$8.00 |
$35.00 |
|
Description |
Tubing
bender for bending 5/8" tubing with 180 degree bend and 2 1/4"
radius used on |
|
aluminum,
brass, copper and annealed steel |
|
Tool Name |
Rental Cost |
Deposit: |
|
Align-a-matic
(pair) |
$12.00 |
$48.00 |
|
Description |
For
checking wheel alignment; requires 1" ramps for use |
|
Tool Name |
Rental Cost |
Deposit: |
|
Armature
growler |
$13.00 |
$53.00 |
|
Description |
Armature
growler for testing universal motor armatures of starters, generators,
and other |
|
Tool Name |
Rental Cost |
Deposit: |
|
Aviat
bungee tool |
$15.00 |
$60.00 |
|
Description |
Aviat
bungee tool used for installing bungee cords on Aviat manufactured and
other |
|
Tool Name |
Rental Cost |
Deposit: |
|
Bogert
landing gear bungee cord tool |
$7.00 |
$27.00 |
|
Description |
Bogert
tool for removing and installing bungee cords on Piper PA24, PA30 and
PA39 |
|
Tool Name |
Rental Cost |
Deposit: |
|
Cable
Tensiometer |
$60.00 |
$249.00 |
|
Description |
T5-2002-101-00
model cable tesiometer for 1/16" cables thru 1/4" cable
(150lb): includes |
|
instruction
book and calibration chart |
|
Tool Name |
Rental Cost |
Deposit: |
|
Cessna
210 downlock gauges |
$72.00 |
$300.00 |
|
Description |
Gauges
for checking downlock overcenter on Cessna 210 series with round gear |
|
Tool Name |
Rental Cost |
Deposit: |
|
Cessna
Nose Fork Reamer |
$17.00 |
$69.00 |
|
Description |
Adjustable
blade reamer for Cessna 100 and 200 series nose forks 1.875 to 2.187
diameter |
|
Tool Name |
Rental Cost |
Deposit: |
|
Choke
tester |
$18.00 |
$77.00 |
|
Description |
Blue-Point
Choke Tester YA862 used to heat and chill test components by use of |
|
compressed
air. Requires at least a 4 HP air compressor |
|
Tool Name |
Rental Cost |
Deposit: |
|
Collet
type stud remover / installer |
$26.00 |
$107.00 |
|
Description |
1/4"-20
thru 5/8"-18 taper collet type SAE stud remover and installer |
|
Tool Name |
Rental Cost |
Deposit: |
|
Dial
bore gauge |
$22.00 |
$92.10 |
|
Description |
Dial
bore gauge for measuring 2" to 6" inside diameter |
|
Tool Name |
Rental Cost |
Deposit: |
|
Flying
wire tensionmeter |
$73.00 |
$304.00 |
|
Description |
Model
1000 Aviat flying wire tensionmeter used for checking tension on Pitts
and other |
|
aircraft
with streamline flying wires |
|
Tool Name |
Rental Cost |
Deposit: |
|
Kearney
#6-5 roll swaging machine |
$150.00 |
$600.00 |
|
Description |
For
swaging control cables with MS type terminals onto galvanized and
stainless steel |
|
cables
from 1/16" diameter thru 1/8" diameter (does not do ball type
terminals, only |
|
shank)
with adapters and fittings. Includes cable cutter |
|
Tool Name |
Rental Cost |
Deposit: |
|
Master
orifice |
$9.00 |
$36.00 |
|
Description |
649953A
Master orifice used to test the cylinder differential compression tester
for |
|
Tool Name |
Rental Cost |
Deposit: |
|
Nicopress
crimper |
$13.00 |
$54.00 |
|
Description |
Crimping
tool for Nicopress sleeve and stop sleeve sizes C, G, M and E
(1/16" cable thru |
|
Tool Name |
Rental Cost |
Deposit: |
|
Parker
tubing beading tool seat |
$27.00 |
$113.00 |
|
Description |
Tool
set for installing beads on tubing for securing hoses with clamps. |
|
Tool Name |
Rental Cost |
Deposit: |
|
Positional
dial indicator |
$24.00 |
$98.00 |
|
Description |
Dial
indicator for measuring run out on various items - crankshaft, brake
disc, etc. |
|
Tool Name |
Rental Cost |
Deposit: |
|
Reversible
safety wire pliers |
$6.00 |
$27.00 |
|
Description |
Reversible
safety wire pliers with cutter. |
|
Tool Name |
Rental Cost |
Deposit: |
|
T-300
Unison Lasar Timing tool |
$18.00 |
$75.00 |
|
Description |
Tool
for timing for Unison Slick LASAR ignition systems. Includes operation
booklet |
|
Tool Name |
Rental Cost |
Deposit: |
|
Torque
wrench |
$20.00 |
$80.00 |
|
Description |
1/2
in. drive 2500 in/lb torque wrench |
Aviat
Aviat bungee tool rental
Aviat model 1000 wire tension meter
Engine General
Engine air cooling differential pressure test equipment
Parker tubing beading tool
T-300 Slick Lasar timing tool
Airframe General
Nicopress crimping tool
Parker tubing beading tool
Have a small aircraft
problem you can't solve? Click below
to send the
question.
Got a specific question about a small
aircraft? Click the
submit question button.
Send mail to tim@littleflyers.comwith
questions or comments about this web site.
Copyright © 2007 Little Flyers
Last modified: February 26, 2007